nukes
I Eat Buttholes Raw
Low B. Then a conventional 8 string below the B. Freaking Kool.
It was 13 dollars for the drill bit I would have used for the feet holes so I bought the little files to make the holes bigger. I think those are a good size for filing nuts too so they may have more use later on. I have a bass that needs a new nut collecting dust.Um...what were the files for?
Just tryin to throw us off the trail weren't ya.
What gauge wire do I need?
I'm going to snip the wires on my combo amp that connect to the speaker and wire two female 1/4" for an amp output and speaker input.
That way I can bypass the amp when I want to run the two cabs together with one 2 ohm head. Or just link the speaker out/in with a small 1/4" so it can still be used as a combo.
Thanks Hips!Those are short runs and don't need to be real thick even with a good amount of power in them. Lot of older speaker cabinets internal wiring is as small as 18 gauge.
On yours, 16 gauge (length of lamp cord) or 14 gauge (strip a length of extension cord) be just fine. Thicker than that totally unnecessary and the extra weight can put unneeded stress on the little tabs/connections.
It's all stranded copper wire. No practical difference between speaker wire and any other wire.
Can Google up a chart that shows resistance/heat/power loss with X power through X size wire going X distance if you want.
Lot of people go too thick on the short runs and too thin on the long runs.
Got heavy ass wire on the 2 feet in their speaker box and not heavy enough ass wire on the 30+ footers running to spread out PA speaker.
You just need ass wire of the correct heaviness. 16 gauge work fine. 14 work fine too if it fits through the little holes on the jacks.
Lend me $600The price has been lowered!:
Gibson EB-2 Bass
Built sometime between 1967 and 1969. Serial No. 852336 In great playing condition. Backstory: It was given to me by a buddy in 1983, who told me that he had let a friend play it, and the friend let...portland.craigslist.org
Lend me $600
You've convinced me.Even with that “repair”?
Not me, unless I knew how to replace that neck and even then, meh.
I’d rather have a Warwick Star Bass V.
have a good one nukes babaAt tonight's gig I will play:
5 string PJ> Pedalboard>Eden WTX260>Schroeder 212.
Fastest neck on the planet.