Halp Tardwheel Political Circle Jerkoff 2017

Tardwheel

  • Total voters
    10
Status
Not open for further replies.
I'm actually kinda surprised it's only half. Between the travel ban and everything else, Trump pretty much told the world "if you're not from here, fuck off"

We've had a huge number of refugees sneak north from the US into Canada, fearing they'd be kicked back to their home country if they stayed in the US.
 
  • Gravy
Reactions: pacojas and my little brony
EU DIPLOMATS today admitted that hardly any of the people arriving in Europe on boats are genuine refugees as they vowed to quicken up the rate of deportations for failed asylum seekers.

Officials in Brussels said the newest wave of migration from North Africa was “clearly and manifestly about economic migrants” and said those people had no right to “enter European soil”.

European leaders are expected to back significantly toughening up the policing of the continent’s outer borders when they meet for an EU Council summit in the Belgian capital tomorrow.

http://www.express.co.uk/news/polit...y-people-arriving-Italy-refugees-deportations
 
Why the fuck did they use "admitted" in that headline? come on.

There's a wave of economic migrants getting shipped out from north america seeking asylum, they're not fleeing persecution or famine and they're getting kicked the fuck out. Looks like the system is doing its job.

Worst part of it is these people were probably promised some great life in the EU working a kickass job, and paid their life savings to some random asshole with a decrepit boat. The smugglers that do that stuff are the worst form of human shit there is.
 
  • Gravy
Reactions: pacojas, Ledboots and my little brony
adi said:
How long does it take to make a bong in a 3D printer?
Click to expand...
Could be 2 hours for a simple pipe, potentially 2 days for some elaborate thing with skulls and weed leaves and shit.

Also depends on the print quality, printing slower with thinner layers takes more time.

http://www.yeggi.com/q/bong/
Pick a bong or two, I'll fire it in Cura and see what it estimates for time.
 
  • Gravy
Reactions: adi
gee said:
Could be 2 hours for a simple pipe, potentially 2 days for some elaborate thing with skulls and weed leaves and shit.

Also depends on the print quality, printing slower with thinner layers takes more time.

http://www.yeggi.com/q/bong/
Pick a bong or two, I'll fire it in Cura and see what it estimates for time.
Click to expand...

would the inside of the pipe be finished like a mirror?

Checking them out :)
 
adi said:
would the inside of the pipe be finished like a mirror?

Checking them out :)
Click to expand...
Getting a perfect mirror finish on the inside would be tough. You'd have to print using silver filament, then polish the inside. Plus this would make the whole bong silver unless you used a multiple extruder printer, which are uncommon/expensive.

Or you could print everything 1 color and paint the inside with silver paint, but I wouldn't smoke out of it.

I'll check your models. About to start food here, gimme 1 hour :)
 
  • Gravy
Reactions: adi
gee said:
Getting a perfect mirror finish on the inside would be tough. You'd have to print using silver filament, then polish the inside. Plus this would make the whole bong silver unless you used a multiple extruder printer, which are uncommon/expensive.

Or you could print everything 1 color and paint the inside with silver paint, but I wouldn't smoke out of it.

I'll check your models. About to start food here, gimme 1 hour :)
Click to expand...
Thanks baba :)
ya the silver paint thing is a big no
 
adi said:
Gee!
https://www.cgtrader.com/free-3d-print-models/gadgets/other/bong-for-3d-printing

https://www.tinkercad.com/things/bgZg9R3ybFT-420-bong

https://www.thingiverse.com/thing:348636
Click to expand...
Using 0.15mm layer height on an Ultimaker 3, here's your time.

First one: 20 hours, 150g of plastic. Probably the best design of them.
Second one: 23 hours, 125g of plastic. Won't fit in my printer (too tall) but otherwise a pretty decent design. Might be a pain in the ass to clean the inside pipe part.
Third one: won't fit in my printer either, takes 13 hours, 75g of plastic. The text on the side of this print sucks, it'll come out looking like crap. Also the bowl is very close to the main pipe, and you'll probably melt the plastic on the main pipe by uisng it. Wouldn't call this a well thought out design.

Filament costs me $28 CAD for 1000g, so a 150g bong works out to $4.20. Heh.
 
  • Gravy
Reactions: adi and pacojas
Status
Not open for further replies.
Top Bottom
Back