Jehannum
Puts the "pro" in procrastination
Connectors on the board should be moving <10A since it's a 24V printer, it should be OK.
Eh, I already made the enclosure and mounted everything up with good quality 12 ga. copper wire and 20 ga. signal wire. It's back to makin' dildos.
Take a pic of the bottom of the board... one fuckup that Anet did was putting thermal relief on the connector pins to make them easier to solder, wondering if Creality did the same thing. If they did, scratch back the solder mask beyond the thermal relief and put some big blobs of solder on there to provide a thermal path for the pins.