Ontopic The 3D printing thread

[Mr. Argumentor]

Looks like I'm missing a library? Fairly sure I've downloaded everything the guides recommend.

This is with an Uno

 

[Jehannum]

You're missing the u8glib library.

 

[Mr. Argumentor]

Fuck, I thought I had that already. Link is already purple on my google...

 

[Jehannum]

Fuck, I thought I had that already. Link is already purple on my google...

I'm a noob at platformio, but "platformio lib list" should show you what's installed.

 

[Mr. Argumentor]

I switched to arduino to give myself as few differences as possible.

 

[Jehannum]

I switched to arduino to give myself as few differences as possible.

That's what I've always used to flash the bootloader.

Make sure you've imported it into the library manager of the arduino lib.

I don't think you need to use the uno after you've flashed the bootloader. After that, you can just flash it via the USB port.

 

[Mr. Argumentor]

I'm gonna have to review this procedure again I guess.

 

[Mr. Argumentor]

Bootloader flashed and now I'm connecting, but I'm getting a "text too big" error for my board when I try to upload

Fuck my life

 

[Mr. Argumentor]

Ok. Up and running with Marlin 2.something.
Now time to try a Benchy and see WTF is going on.

 

[Mr. Argumentor]

Ok. We are probing, but I need to adjust the map. Also, I get to roughly 180-190°C and the system gives me a heater failure error (last pic)

 

[Jehannum]

Run the PID autotune on the heating element.

PID autotune

This command initiates a process of heating and cooling to determine the proper PID values for the specified hotend or the heated bed.

marlinfw.org

 

[Mr. Argumentor]

I can't seem to connect to send gcode.
If the printer is turned off it will connect, but if I try to turn the power supply on it disconnects and then says the port is busy.

 

[Jehannum]

then

I can't seem to connect to send gcode.
If the printer is turned off it will connect, but if I try to turn the power supply on it disconnects and then says the port is busy.

Try making a gcode file with the PID autotune in it, and schlep it across on a memory card, then execute it as a print job.

It may be accessible in the menus, as well.

 

[Mr. Argumentor]

Cura seems to connect where Pronterface, Repetier, and Arduino don't want to. With Cura I can send a code, but I can't receive.

I need to play with the settings in that usage section there.

 

[Jehannum]

Cura seems to connect where Pronterface, Repetier, and Arduino don't want to. With Cura I can send a code, but I can't receive.

I need to play with the settings in that usage section there.

You need to set the baud rate correctly. 115200, if memory serves.

Also, some of the lower-end USB cords can fuck up.

 

[Mr. Argumentor]

I've got it set for that and it doesn't want to connect.

 

[Mr. Argumentor]

12:26:54.361 : N19 M503*29
12:26:54.452 : echo: G21 ; Units in mm (mm)
12:26:54.452 : echo: M149 C ; Units in Celsius
12:26:54.452 : echoilament settings: Disabled
12:26:54.452 : echo: M200 D1.75
12:26:54.452 : echo: M200 D0
12:26:54.452 : echo:Steps per unit:
12:26:54.452 : echo: M92 X80.00 Y80.00 Z400.00 E93.00
12:26:54.452 : echo:Maximum feedrates (units/s):
12:26:54.452 : echo: M203 X500.00 Y500.00 Z5.00 E25.00
12:26:54.452 : echo:Maximum Acceleration (units/s2):
12:26:54.452 : echo: M201 X500.00 Y500.00 Z100.00 E5000.00
12:26:54.453 : echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
12:26:54.453 : echo: M204 P500.00 R500.00 T500.00
12:26:54.453 : echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
12:26:54.453 : echo: M205 B20000.00 S0.00 T0.00 J0.08
12:26:54.453 : echo:Home offset:
12:26:54.453 : echo: M206 X0.00 Y0.00 Z0.00
12:26:54.453 : echo:Auto Bed Leveling:
12:26:54.453 : echo: M420 S0 Z0.00
12:26:54.453 : echo:Material heatup parameters:
12:26:54.453 : echo: M145 S0 H200 B60 F0
12:26:54.453 : echo: M145 S1 H240 B75 F0
12:26:54.453 : echoID settings:
12:26:54.453 : echo: M301 P19.35 I1.34 D69.75
12:26:54.453 : echo:Z-Probe Offset (mm):
12:26:54.454 : echo: M851 X-42.00 Y-5.00 Z0.00

 

[Mr. Argumentor]

Maybe I should put that in code tags

 

[Mr. Argumentor]

12:40:52.251 : T:24.56 /0.00 B:23.95 /0.00 @:127 B@:0
12:40:54.252 : T:27.72 /0.00 B:23.98 /0.00 @:127 B@:0
12:40:56.255 : T:32.03 /0.00 B:23.98 /0.00 @:127 B@:0
12:40:58.250 : T:36.19 /0.00 B:23.95 /0.00 @:127 B@:0
12:41:00.252 : T:40.75 /0.00 B:23.95 /0.00 @:127 B@:0
12:41:02.249 : T:44.70 /0.00 B:23.91 /0.00 @:127 B@:0
12:41:04.245 : T:49.48 /0.00 B:23.87 /0.00 @:127 B@:0
12:41:06.262 : T:53.22 /0.00 B:23.79 /0.00 @:127 B@:0
12:41:08.262 : T:57.13 /0.00 B:24.02 /0.00 @:127 B@:0
12:41:10.258 : T:61.03 /0.00 B:23.91 /0.00 @:127 B@:0
12:41:12.256 : T:64.52 /0.00 B:24.10 /0.00 @:127 B@:0
12:41:14.256 : T:68.37 /0.00 B:23.91 /0.00 @:127 B@:0
12:41:16.257 : T:71.78 /0.00 B:23.98 /0.00 @:127 B@:0
12:41:18.259 : T:74.96 /0.00 B:23.98 /0.00 @:127 B@:0
12:41:20.253 : T:78.15 /0.00 B:23.91 /0.00 @:127 B@:0
12:41:22.256 : T:81.21 /0.00 B:23.91 /0.00 @:127 B@:0
12:41:24.253 : T:84.33 /0.00 B:24.02 /0.00 @:127 B@:0
12:41:26.251 : T:87.16 /0.00 B:23.87 /0.00 @:127 B@:0
12:41:28.268 : T:89.89 /0.00 B:23.87 /0.00 @:127 B@:0
12:41:30.266 : T:92.49 /0.00 B:23.95 /0.00 @:127 B@:0
12:41:32.265 : T:95.20 /0.00 B:23.98 /0.00 @:127 B@:0
12:41:34.261 : T:97.58 /0.00 B:23.87 /0.00 @:127 B@:0
12:41:36.280 : T:99.93 /0.00 B:23.95 /0.00 @:127 B@:0
12:41:38.278 : T:102.26 /0.00 B:23.83 /0.00 @:127 B@:0
12:41:40.279 : T:104.50 /0.00 B:23.98 /0.00 @:127 B@:0
12:41:42.275 : T:106.85 /0.00 B:23.79 /0.00 @:127 B@:0
12:41:44.275 : T:108.86 /0.00 B:23.95 /0.00 @:127 B@:0
12:41:46.274 : T:110.90 /0.00 B:23.83 /0.00 @:127 B@:0
12:41:48.271 : T:112.89 /0.00 B:24.02 /0.00 @:127 B@:0
12:41:50.272 : T:114.83 /0.00 B:23.87 /0.00 @:127 B@:0
12:41:52.268 : T:116.77 /0.00 B:23.95 /0.00 @:127 B@:0
12:41:54.269 : T:118.50 /0.00 B:23.91 /0.00 @:127 B@:0
12:41:56.266 : T:120.15 /0.00 B:24.06 /0.00 @:127 B@:0
12:41:58.267 : T:121.88 /0.00 B:23.98 /0.00 @:127 B@:0
12:42:00.264 : T:123.58 /0.00 B:24.14 /0.00 @:127 B@:0
12:42:02.266 : T:125.29 /0.00 B:23.87 /0.00 @:127 B@:0
12:42:04.264 : T:126.83 /0.00 B:23.95 /0.00 @:127 B@:0
12:42:06.264 : T:128.23 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:08.277 : T:129.64 /0.00 B:23.87 /0.00 @:127 B@:0
12:42:10.276 : T:131.03 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:12.278 : T:132.66 /0.00 B:23.95 /0.00 @:127 B@:0
12:42:14.276 : T:133.99 /0.00 B:23.95 /0.00 @:127 B@:0
12:42:16.271 : T:135.30 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:18.274 : T:136.55 /0.00 B:23.87 /0.00 @:127 B@:0
12:42:20.272 : T:137.89 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:22.272 : T:138.97 /0.00 B:24.06 /0.00 @:127 B@:0
12:42:24.270 : T:140.10 /0.00 B:23.95 /0.00 @:127 B@:0
12:42:26.266 : T:141.33 /0.00 B:24.10 /0.00 @:127 B@:0
12:42:28.269 : T:142.51 /0.00 B:24.18 /0.00 @:127 B@:0
12:42:30.265 : T:143.78 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:32.287 : T:144.91 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:34.281 : T:145.92 /0.00 B:24.14 /0.00 @:127 B@:0
12:42:36.282 : T:146.97 /0.00 B:24.10 /0.00 @:127 B@:0
12:42:38.280 : T:147.97 /0.00 B:24.10 /0.00 @:127 B@:0
12:42:40.280 : T:148.96 /0.00 B:23.98 /0.00 @:127 B@:0
12:42:42.275 : T:149.83 /0.00 B:23.98 /0.00 @:127 B@:0
12:42:44.276 : T:150.81 /0.00 B:24.02 /0.00 @:127 B@:0
12:42:46.272 : T:151.78 /0.00 B:24.06 /0.00 @:127 B@:0
12:42:48.278 : T:152.68 /0.00 B:24.06 /0.00 @:127 B@:0
12:42:50.272 : T:153.67 /0.00 B:24.22 /0.00 @:127 B@:0
12:42:52.271 : T:154.54 /0.00 B:24.26 /0.00 @:127 B@:0
12:42:54.270 : T:155.34 /0.00 B:24.18 /0.00 @:127 B@:0
12:42:56.268 : T:156.13 /0.00 B:24.10 /0.00 @:127 B@:0
12:42:58.267 : T:156.91 /0.00 B:24.26 /0.00 @:127 B@:0
12:43:00.284 : T:157.61 /0.00 B:24.10 /0.00 @:127 B@:0
12:43:02.280 : T:158.32 /0.00 B:24.18 /0.00 @:127 B@:0
12:43:04.284 : T:159.04 /0.00 B:24.18 /0.00 @:127 B@:0
12:43:06.280 : T:159.68 /0.00 B:24.34 /0.00 @:127 B@:0
12:43:08.281 : T:160.35 /0.00 B:24.22 /0.00 @:127 B@:0
12:43:10.283 : T:161.14 /0.00 B:24.22 /0.00 @:127 B@:0
12:43:12.283 : T:161.78 /0.00 B:24.22 /0.00 @:127 B@:0
12:43:14.278 : T:162.46 /0.00 B:24.26 /0.00 @:127 B@:0
12:43:16.275 : T:163.22 /0.00 B:24.30 /0.00 @:127 B@:0
12:43:18.275 : T:163.84 /0.00 B:24.26 /0.00 @:127 B@:0
12:43:20.274 : T:164.45 /0.00 B:24.34 /0.00 @:127 B@:0
12:43:22.289 : T:165.00 /0.00 B:24.26 /0.00 @:127 B@:0
12:43:24.285 : T:165.57 /0.00 B:24.22 /0.00 @:127 B@:0
12:43:26.287 : T:166.12 /0.00 B:24.30 /0.00 @:127 B@:0
12:43:28.289 : T:166.76 /0.00 B:24.30 /0.00 @:127 B@:0
12:43:30.285 : T:167.26 /0.00 B:24.26 /0.00 @:127 B@:0
12:43:32.281 : T:167.79 /0.00 B:24.30 /0.00 @:127 B@:0
12:43:34.283 : T:168.22 /0.00 B:24.41 /0.00 @:127 B@:0
12:43:36.282 : T:168.73 /0.00 B:24.30 /0.00 @:127 B@:0
12:43:38.282 : T:169.15 /0.00 B:24.26 /0.00 @:127 B@:0
12:43:40.281 : T:169.56 /0.00 B:24.37 /0.00 @:127 B@:0
12:43:42.277 : T:170.05 /0.00 B:24.41 /0.00 @:127 B@:0
12:43:44.294 : T:170.46 /0.00 B:24.37 /0.00 @:127 B@:0
12:43:46.295 : T:171.02 /0.00 B:24.34 /0.00 @:127 B@:0
12:43:48.289 : T:171.55 /0.00 B:24.45 /0.00 @:127 B@:0
12:43:50.290 : T:171.99 /0.00 B:24.37 /0.00 @:127 B@:0
12:43:52.288 : T:172.45 /0.00 B:24.41 /0.00 @:127 B@:0
12:43:54.287 : T:172.99 /0.00 B:24.37 /0.00 @:127 B@:0
12:43:56.287 : T:173.43 /0.00 B:24.34 /0.00 @:127 B@:0
12:43:58.285 : T:173.80 /0.00 B:24.41 /0.00 @:127 B@:0
12:44:00.289 : T:174.17 /0.00 B:24.41 /0.00 @:127 B@:0
12:44:02.288 : T:174.72 /0.00 B:24.41 /0.00 @:127 B@:0
12:44:04.281 : T:174.98 /0.00 B:24.37 /0.00 @:127 B@:0
12:44:06.279 : T:175.44 /0.00 B:24.34 /0.00 @:127 B@:0
12:44:08.280 : T:175.90 /0.00 B:24.37 /0.00 @:127 B@:0
12:44:10.281 : T:176.18 /0.00 B:24.34 /0.00 @:127 B@:0
12:44:12.293 : T:176.55 /0.00 B:24.30 /0.00 @:127 B@:0
12:44:14.293 : T:176.92 /0.00 B:24.37 /0.00 @:127 B@:0
12:44:16.291 : T:177.31 /0.00 B:24.45 /0.00 @:127 B@:0
12:44:18.292 : T:177.62 /0.00 B:24.49 /0.00 @:127 B@:0
12:44:20.289 : T:177.85 /0.00 B:24.53 /0.00 @:127 B@:0
12:44:22.288 : T:178.17 /0.00 B:24.49 /0.00 @:127 B@:0
12:44:24.288 : T:178.52 /0.00 B:24.57 /0.00 @:127 B@:0
12:44:26.285 : T:178.89 /0.00 B:24.53 /0.00 @:127 B@:0
12:44:28.284 : T:179.10 /0.00 B:24.41 /0.00 @:127 B@:0
12:44:30.284 : T:179.38 /0.00 B:24.49 /0.00 @:127 B@:0
12:44:32.285 : T:179.63 /0.00 B:24.53 /0.00 @:127 B@:0
12:44:34.298 : T:179.84 /0.00 B:24.57 /0.00 @:127 B@:0
12:44:36.300 : T:180.20 /0.00 B:24.49 /0.00 @:127 B@:0
12:44:38.299 : T:180.45 /0.00 B:24.61 /0.00 @:127 B@:0
12:44:40.294 : T:180.74 /0.00 B:24.61 /0.00 @:127 B@:0
12:44:42.293 : T:180.97 /0.00 B:24.49 /0.00 @:127 B@:0
12:44:44.294 : T:181.34 /0.00 B:24.61 /0.00 @:127 B@:0
12:44:46.295 : T:181.56 /0.00 B:24.65 /0.00 @:127 B@:0
12:44:48.291 : T:181.82 /0.00 B:24.57 /0.00 @:127 B@:0
12:44:50.289 : T:182.10 /0.00 B:24.80 /0.00 @:127 B@:0
12:44:52.293 : T:182.27 /0.00 B:24.80 /0.00 @:127 B@:0
12:44:54.290 : T:182.67 /0.00 B:24.69 /0.00 @:127 B@:0
12:44:56.289 : T:182.81 /0.00 B:24.65 /0.00 @:127 B@:0
12:44:58.285 : T:182.95 /0.00 B:24.69 /0.00 @:127 B@:0
12:45:00.283 : T:183.24 /0.00 B:24.69 /0.00 @:127 B@:0
12:45:02.300 : T:183.47 /0.00 B:24.69 /0.00 @:127 B@:0
12:45:04.297 : T:183.64 /0.00 B:24.77 /0.00 @:127 B@:0
12:45:06.298 : T:183.92 /0.00 B:24.80 /0.00 @:127 B@:0
12:45:08.299 : T:184.12 /0.00 B:24.88 /0.00 @:127 B@:0
12:45:10.295 : T:184.35 /0.00 B:24.80 /0.00 @:127 B@:0
12:45:12.293 : T:184.52 /0.00 B:24.77 /0.00 @:127 B@:0
12:45:14.296 : T:184.60 /0.00 B:24.73 /0.00 @:127 B@:0
12:45:16.310 : T:184.77 /0.00 B:24.92 /0.00 @:127 B@:0
12:45:16.356 : Error:Heating failed, system stopped! Heater_ID: 0
12:45:16.356 : Errorrinter halted. kill() called!

 

[Valve1138]

Clearly the issue is that those emojis have snuck into the firmware.