Hey all you network folks.

G-Shock

Flaccid Member
Feb 25, 2009
3,175
11
0
Dallas
Marklar
₥0
I'm trying to configure an interface for this AP 1252AG It's the dot11radio ( so I can turn it up)
config) int dot11radio (0|1) 0 for 2.4 and 1 for 5.0

I can only get as far as dot11radio and it never works, I'll copy the errors I get

int dot11Radio 0 = Invalid input detected at '^' marker. ^ is on the o of dot11radio
CiscoAP(config)#int dot11Radio 1

I get the same error, but it points to the 1

CiscoAP(config)#int dot11Radio ?

= <0-0> Dot11Radio interface number


I've not worked w/ to many wireless APs in CLI, I read up on this part and it say's I'm doing it right. Any ideas?

Thanks in advance.

OH also I don't see it when I run sh int... Why!
 
lasjdf;lasdkjfal;ksdfjasdf'laskdjflas




So I picked this massive fucker up and guess what... the cards were not seated....


FML

Close thread.


or talk about networking
 
i do this often, i copy something on one comp, hit the KVM hot keys to switch over to a dif. PC, and am surprised when whatever i just copied doesn't paste. :(